Put a diffraction grating after the camera lens and get the spectrum!
i
Selects the peripheral lens sensor interface. Pushing "Start Run" wakes up the asynchronous tracking matrix thread.
i
Filter to remove noise. Be careful not to lose spectral features!
i
If you are using an LED, you can still use its central wavelength.
i
Wavelength change per pixel.
i
Force Manual Only: Along your path, intensity is plotted. Ordinary Spectrum: X-axis in wavelengths. Raman Scattering: Code accumulates N frames due to smartphone limits.
π’ SYSTEM MONITOR MATRIX: Dormant standby mode active. Select lens hardware and press "Start Run".
i
Use the power of Planck Black Body Radiation and calibrate the spectrum with a resistive/Tungsten lamp.
i
Use the power of sun and water absorption to calibrate spectrum.
i
Use the power of graphite and it's D and G peaks to calibrate your spectrum, even if you have LED as your Raman source.
i
Calibration can be saved inside a profile, where you can load in your measurements. Hit the Reset button to discard calibration parameters.